欢迎访问《核聚变与等离子体物理》官方网站,今天是 分享到:

核聚变与等离子体物理 ›› 2009, Vol. 29 ›› Issue (2): 142-145.

• 核聚变工程技术 • 上一篇    下一篇

ITER真空室中子屏蔽组件的结构动力学有限元分析

刘常乐, 武松涛, 郁杰   

  1. (中国科学院等离子体物理研究所,合肥 230031)
  • 收稿日期:2008-04-10 修回日期:2008-11-30 出版日期:2009-06-15 发布日期:2010-05-24
  • 作者简介:刘常乐(1972-),男,安徽合肥人,博士,主要研究方向:核聚变装置设计与分析、CAD/CAM应用研究。
  • 基金资助:
    国家973计划资助项目(2005CB724002)

Structure dynamic analysis of neutron shielding component for ITER vacuum vessel  

LIU Chang-le, WU Song-tao, YU Jie   

  1. (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031)
  • Received:2008-04-10 Revised:2008-11-30 Online:2009-06-15 Published:2010-05-24

摘要: 为考察ITER真空室中子屏蔽结构组件对选址地法国Cadarache地震加速度频谱的单点响应情况,根据ITER真空室中子屏蔽组件的设计概念和结构特点,建立了组件结构的有限元分析模型。应用有限元分析软件ANSYS对组件进行了结构模态分析,并基于其结果进行了模态叠加。分析发现,组件结构的低阶振型与高阶振型有差异,且结构与低阶频率发生响应,但引起的位移与应力在允许的范围之内。结果表明,装配体结构更能适应结构抗震性的设计要求。仿真计算的结果为组件结构的优化设计和下一步的工程实现提供了可靠的依据。

关键词: ITER真空室, 中子屏蔽组件, 动力学分析, 有限元方法

Abstract: To study the single-point response of the neutron shielding component of ITER vacuum vessel based on the acceleration seismic spectrum of ITER site, Cadarache, France, the FEM (finite element method) analysis model was made according to its original design concept and the structure features. Modal analysis of the component was performed by using ANSYS, and based on the results, modal superposition was calculated and discussed. The analysis shows different vibrations in the different frequency ranks and the model was response to the lower ranks frequency. However, the stress and displacement was under the permission. Consequently, the assembly one is more reasonable to resist the seismic cases, and the present work maybe contributes a little to the future optimization of component and the engineering realization in next steps.

Key words: ITER vacuum vessel, Neutron shielding component, Dynamic analysis, Finite element method

中图分类号: