|
[1] Sneha S. Thermal plasma technology: the prospective
future in material processing [J]. Journal of Cleaner
Production, 2017, 142: 3131−3150.
[2] Maher I Boulos, Pierre L Fauchais, Emil Pfender.
Handbook of thermal plasmas [M]. Switzerland: Springer
International Publishing, 2016.
[3] Gomez E, Amutha Rani D, Cheeseman C R, et al.
Thermal plasma technology for the treatment of wastes: a
critical review [J]. Journal of Hazardous Materials, 2009,
161(2−3): 614−626.
[4] Caliari F R, Miranda F S, Reis D A P, et al. Plasma torch
for supersonic plasma spray at atmospheric pressure [J].
Journal of Materials Processing Technology, 2016, 237:
351−360.
[5] Du C M, Shang C, Gong X J, et al. Plasma methods for
metals recovery from metal-containing waste [J]. Waste
Management, 2018, 77: 373−387.
[6] 程亮, 俞民, 陈佺, 等. 一种用于煤粉点火等离子体发生器的电弧特性研究 [J]. 核技术, 2007, 30(10):
872−875.
[7] 赵敏捷, 方建军, 张琳, 等. 煤等离子体裂解制乙炔技术研究现状 [J]. 化学工程, 2017, 45(1): 45−49.
[8] Pan X C, Yan J H, Xie Z M. Detoxifying PCDD/Fs and
heavy metals in fly ash from medical waste incinerators
with a DC double arc plasma torch [J]. Journal of
Environmental Sciences, 2013, 25(7): 1362−1367.
[9] Mária Čarnogurská, Marián Lázár, Michal Puškár, et al.
Measurement and evaluation of properties of MSW fly
ash treated by plasma [J]. Measurement, 2015, 62(1):
155−161.
[10] Ma W C, Fang Y B, Chen D M, et al. Volatilization and
leaching behavior of heavy metals in MSW incineration
fly ash in a DC arc plasma furnace [J]. Fuel, 2017, 210:
145−153.
[11] 郭志, 刘志敏. 垃圾焚烧飞灰悬浮预热等离子体熔融
系统热力学计算及能耗费用研究 [J]. 热力发电, 2020,
49(4): 12−18.
[12] 袁行球, 李辉, 赵太泽, 等. 直流电弧等离子体炬的特性研究 [J]. 物理学报, 2004, 53(11): 3806−3813.
[13] Guo Z W, Yin S, Liao H L, et al. Three-dimensional
simulation of an argon-hydrogen DC non-transferred arc
plasma torch [J]. International Journal of Heat and Mass
Transfer, 2015, 80(7): 644−652.
[14] 陈文波, 陈伦江, 刘川东, 等. 直流电弧等离子体炬的
数值模拟研究 [J]. 真空, 2019, 56(1): 56−58.
[15] 魏建平, 唐达培. 磁控直流等离子体炬多耦合场的三
维数值模拟 [J]. 人工晶体学报 , 2014, 43(12):
3301−3305.
[16] 闫星辰, 刘敏, 徐国富, 等. 低压直流电弧等离子体传
热与流动的数值模拟 [J]. 中国表面工程, 2015, 28(5):
57−63.
[17] Min H, Sang H H. Comparative analysis of turbulent
effects on thermal plasma characteristics inside the
plasma torches with rod and well type cathodes [J].
Journal of physics D: applied physics, 2002, 35(16):
1946−1954.
[18] Anshakov A S, Domarov P V, Butakov E B, et al. Effect
of swirling gas flow in electrode cavity on its erosion [J].
Advances in Engineering Research, 2017, 133: 181−185.
[19] Valincius V, Krusinskaite V, Valatkevicius P, et al.
Electric and thermal characteristics of the linear, sectional
dc plasma generator [J]. Plasma Sources Science and
Technology, 2004, 13(2): 199−206.
[20] Anshakov A S, Urbakh E K, Radko S I, et al. Electric-arc
steam plasma generator [J]. Thermophysics and Aeromechanics, 2005, 22(1): 95−104.
|
