[1] Mueller D. The physics of tokamak start-up [J]. Physics of Plasmas, 2013, 20(5): 058101.
[2] Kumar A, Pradhan S. 0-D modeling of SST-1 plasma
break-down & start-up using ECRH assisted
pre-ionization [J]. Fusion Engineering and Design, 2016,
105: 22.
[3] 段文学, 马志为, 吴斌. EAST 低杂波电流驱动的数值
模拟 [J]. 核聚变与等离子体物理, 2010, 30(4): 289.
[4] Wu B, Wang J, Li J, et al. Neutral beam injection
simulation of EAST [J]. Fusion Engineering and Design,
2011, 86(6): 947.
[5] 曹建勇, 周红霞, 刘鹤, 等. HL-2M 装置 5MW-NBI 加
热束线偏转磁体研制 [J]. 核聚变与等离子体物理,
2017, 37(4): 411.
[6] de Vries P C, Gribov Y, Martin-Solis J, et al. Analysis of
runaway electron discharge formation during JET plasma
start-up [J]. Plasma Physics and Controlled Fusion, 2020,
62(12): 125014.
[7] Hada K, Nagasaki K, Masuda K, et al. One-dimensional
analysis of ECRH-assisted plasma start-up in JT-60SA [J].
Fusion Science and Technology, 2015, 67(4): 693.
[8] Lee J, Kim J, An Y, et al. Study on ECH-assisted start-up
using trapped particle configuration in KSTAR and
application to ITER [J]. Nuclear Fusion, 2017, 57(12):
126033.
[9] Singh A K, Banerjee S, Bandyopadhyay I, et al.
Parameter space validation through OOPS simulations of
plasma burnthrough and discharge evolution in the SST-1
tokamak [J]. Physics of Plasmas, 2020, 27(4): 042505.
[10] Song X, Song X M, Xia F, et al. Study of plasma startup
on HL-2A tokamak [J]. IEEE Transactions on Plasma
Science, 2014, 42(3): 439.
[11] 李佳鲜, 潘宇东, 张锦华. HL-2M 装置欧姆放电的数
值模拟 [J]. 核聚变与等离子体物理, 2009, 29(2): 111.
[12] 毛瑞, 李佳鲜, 马瑞, 等. HL-2M 装置实时等离子体平
衡重建算法 [J]. 核聚变与等离子体物理, 2013, 33(3):
231.
[13] 张馨予, 肖炳甲, 罗正平. EAST 全超导托卡马克等离
子体击穿模拟 [J]. 核电子学与探测技术, 2008, 28(5):
878.
[14] 刘成岳, 肖炳甲, 吴斌, 等. EAST 纯欧姆放电的数值
模拟 [J]. 核聚变与等离子体物理, 2007, 27(4): 280.
[15] 牛兴平, 吴斌. EAST 放电的数值模拟及伏秒数分析
[J]. 核聚变与等离子体物理, 2006, 26(4): 277–281.
[16] Wang N, Jin H, Zhuang G, et al. Breakdown assisted by a
novel electron drift injection in the J-TEXT tokamak [J].
Review of Scientific Instruments, 2014, 85(7): 073505.
[17] 李建刚. 托卡马克研究的现状及发展 [J]. 物理, 2016,
45(2): 88.
[18] Hawryluk R J, Schmidt J A. Effects of low-z impurities
during the start-up phase of a large tokamak [J]. Nuclear
Fusion, 1976, 16(5): 775.
[19] Hada K, Nagasaki K, Masuda K, et al. Analysis of ECRH
pre-ionization for plasma start-up in JT-60SA [J]. Plasma
and Fusion Research, 2012, 7: 2403104.
[20] Lloyd B, Carolan P G, Warrick C D. ECRH-assisted
start-up in ITER [J]. Plasma Physics and Controlled
Fusion, 1996, 38(9): 1627.
[21] Kim H-T, Sips A C C, EFDA-JET Contributors. Physics
of plasma burn-through and DYON simulations for the
JET ITER-like wall [J]. Nuclear Fusion, 2013, 53(8):
083024.
|